Compaq HSZ80 Przewodnik Instalacji Pobierz pdf (Strona 17)

Service Guide

EK-HSG80-UP. B01 Page 17

NOTE

In mirrored mode, FRUTIL will initialize the mirrored portion of

the new cache module, check for old data on the cache

module, and then restart all device ports. After the device

ports have been restarted, FRUTIL will test the cache module

and the ECB. After the test completes, the device ports will

quiesce and a mirror copy of the cache module data will be

created on the newly installed cache module.

NOTE

One or two host fibre cables may be attached, depending on

the configuration.

10. Press return to continue. FRUTIL will exit. If the other controller did not restart, follow these

steps:

a. Press and hold the other controller’s

RESET button.

b. Insert the other controller’s program card.

c. Release the

RESET button.

11. Connect the host fibre cables to controller B.

12. Enable failover, and re-establish the dual-redundant controller configuration with the

following command:

HSG80> SET FAILOVER COPY=THIS_CONTROLLER

13. Set the prompt to the new controller type using:

HSZ80> SET OTHER_CONTROLLER PROMPT=“HSG80>”

This command copies the subsystem’s configuration from “this controller” to the new

controller. This will cause the other controller to restart.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Brak uwag

Compaq HSZ80 Przewodnik Instalacji Strona 17