Compaq 2000fc Instrukcja Naprawy Pobierz pdf (Strona 52)

B-10 POST Error Messages

POST Error Messages Continued

Screen Message Beeps* Probable Cause Recommended Action

Flashing Power and Hard

Drive Green LEDs

None Unseated riser board. 1. Remove riser board.

2. Wipe connector.

3. Reinstall riser board.

Red Power LED Blinks Every

2 Seconds

None Power supply overloaded. 1. Push in power button. LED

should be green.

2. Remove all AC power from

computer, wait 30 seconds,

then apply power.

3. Remove load from power

supply by removing options

one at a time until computer

runs.

4. Check for damage to system

board.

5. Replace system board.

6. Replace power supply.

Red Power LED Blinks Every

Second

None System memory error. 1. Check memory module.

2. Remove and reseat memory

module.

3. See the "Solving Memory

Problems" section of this

guide.

Red power LED ON None Processor unseated. Reseat processor in system board.

* L = Long, S = Short

Find Error Code

Click Here to Find Error Code

Click Here to Find Error CodeClick Here to Find Error CodeClick Here to Find Error Code

1 2 ... 47 48 49 50 51 52

Brak uwag

Compaq 2000fc Instrukcja Naprawy Strona 52