Compaq 2000fc Instrukcja Naprawy Strona 44

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 43
B-2 POST Error Messages
POST Error Messages Continued
Screen Message Beeps* Probable Cause Recommended Action
164-Memory Size Error 2S Memory configuration
is incorrect.
1. Run Computer Setup (F10
Setup) or Windows utilities.
2. Make sure memory module(s)
(if any) are installed properly.
3. Verify proper memory module
type.
183-Invalid Processor
Jumper Setting
2S System board jumper
improperly set.
Reset system board jumpers to
match processor and bus speeds.
201-Memory Error None RAM failure. 1. Run computer Setup (F10
Setup) or Windows utilities.
2. Ensure memory and continuity
modules are installed
correctly.
3. Verify proper memory module
type.
4. Remove and replace memory
module(s) one at a time to
isolate faulty module.
5. Replace the faulty memory
module(s).
6. If error persists after replacing
memory modules, replace the
system board.
202-Memory Type Mismatch None Memory modules do not
match each other.
Replace memory modules with
matched sets.
207-ECC Corrected Single
Bit Errors in DIMM/SIMM
Pair(s) X,X,... in Memory
Socket(s) y,y
2S Single Bit ECC error. 1. Verify proper memory module
type.
2. Try another memory socket.
3. Replace memory module if
problem persists.
213-Incompatible DIMM
Module in DIMM Socket(s)
X,X
2S A DIMM module in DIMM
socket identified in the error
message is missing critical
SPD information, or is
incompatible with the
chipset.
1. Verify proper memory module
type.
2. Try another memory socket.
3. Replace DIMM with a module
conforming to the SPD
standard.
* L = Long, S = Short
continued
Find Error Code
Click Here to Find Error Code
Click Here to Find Error CodeClick Here to Find Error CodeClick Here to Find Error Code
Przeglądanie stron 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Komentarze do niniejszej Instrukcji

Brak uwag