Compaq Wireless LAN 100 Informacje Techniczne Strona 70

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 121
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 69
4. Detach the SIM card cable (3). The SIM card cable is attached to the battery bay with tape.
Reverse this procedure to install the USB board.
If it is necessary to replace the internal display switch module, perform the following steps:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the internal display switch bracket to the
base enclosure.
2. Remove the internal display switch bracket (2) and module (3) from the base enclosure.
Reverse this procedure to install the internal display switch.
62 Chapter 4 Removal and replacement procedures
Przeglądanie stron 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 120 121

Komentarze do niniejszej Instrukcji

Brak uwag