Compaq 4000S Dokumentacja Pobierz pdf (Strona 63)

8. To install a new expansion card, hold the card just above the expansion socket on the system

board then move the card toward the rear of the chassis (1) so that the bracket on the card is

aligned with the open slot on the rear of the chassis. Press the card straight down into the

expansion socket on the system board (2).

Figure 6-13 Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole

connector seats properly in the expansion card slot.

9. Rotate the slot cover retention latch back in place to secure the expansion card.

Figure 6-14 Closing the Expansion Slot Retainer

10. Connect external cables to the installed card, if needed. Connect internal cables to the system

board, if needed.

11. Replace the access panel.

Removing or Installing an Expansion Card

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 187 188

Brak uwag

Compaq 4000S Dokumentacja Strona 63