Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Instrukcja Obsługi Strona 59

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 422
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 58
Table 2–2: RAID Controller Minimum Required Array Controller Software
RAID Controller
Minimum Required Array Controller
Software
HSZ20
3.4
HSZ22 (RAID Array 3000) D11x
HSZ40
3.7
HSZ50
5.7
HSZ70
7.7
HSZ80
8.3-1
HSG60
8.5
HSG80
8.5
RAID controllers can be configured with the number of SCSI IDs as listed
in Table 2–3.
Table 2–3: RAID Controller SCSI IDs
RAID Controller Number of SCSI IDs Supported
HSZ20
4
HSZ22 (RAID Array 3000)
2
HSZ40
4
HSZ50
4
HSZ70
8
HSZ80
15
HSG60 N/A
HSG80 N/A
The following restrictions are imposed for support of the StorageWorks RAID
Array 3000 (RA3000) subsystem:
The RAID Array 3000 (RA3000) with HSZ22 controller does not
support multi-bus access or multiple-bus failover. You cannot achieve a
no-single-point-of-failure (NSPOF) cluster using an RA3000.
The KZPBA-CB UltraSCSI host adapter is the only SCSI bus host
adapter supported with the RA3000 in a TruCluster Server cluster. The
KZPBA-CB requires ISP 1020/1040 firmware Version 5.57 (or higher),
which is available with the system SRM console firmware on the Alpha
Systems Firmware 5.4 or later Update CD.
Hardware Requirements and Restrictions 2–11
Przeglądanie stron 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 421 422

Komentarze do niniejszej Instrukcji

Brak uwag