Compaq 4354R - StorageWorks Enclosure Storage Instrukcja Obsługi Pobierz pdf (Strona 139)

Configuration Procedures 5–17

4. Assign the RAIDset a unit number to make it accessible by the hosts. See “Assigning

Unit Numbers and Unit Qualifiers” on page 5–19.

For example:

The commands to create RAID1, a RAIDset with three members (DISK10000,

DISK20000, and DISK10100) and to initialize it with default values:

ADD RAIDSET RAID1 DISK10000 DISK20000 DISK10100

INITIALIZE RAID1

SHOW RAID1

Configuring a Striped Mirrorset

1. Create, but do not initialize, at least two mirrorsets.

See “Configuring a Mirrorset” on page 5–15.

2. Create a stripeset and specify the mirrorsets it contains:

ADD STRIPESET STRIPESET-NAME MIRRORSET-1 MIRRORSET-2....MIRRORSET-N

3. Initialize the striped mirrorset, specifying any desired switches:

INITIALIZE STRIPESET-NAME SWITCH

See “Initialization Switches” on page 2–25 for a description of the initialization

switches.

4. Verify the striped mirrorset configuration:

SHOW STRIPESET-NAME

5. Assign the stripeset mirrorset a unit number to make it accessible by the hosts. See

“Assigning Unit Numbers and Unit Qualifiers” on page 5–19.

For example:

The commands to create Stripe1, a striped mirrorset that comprises Mirr1, Mirr2, and

Mirr3, each of which is a two-member mirrorset:

ADD MIRRORSET MIRR1 DISK10000 DISK20000

ADD MIRRORSET MIRR2 DISK20100 DISK10100

ADD MIRRORSET MIRR3 DISK10200 DISK20200

ADD STRIPESET STRIPE1 MIRR1 MIRR2 MIRR3

INITIALIZE STRIPE1

SHOW STRIPE1

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 217 218

Brak uwag

Compaq 4354R - StorageWorks Enclosure Storage Instrukcja Obsługi Strona 139