Compaq ProLiant Storage System U1 Podręcznik Użytkownika Pobierz pdf (Strona 31)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-3 Installation of ProLiant Storage System /U

Compaq ProLiant Storage System /U User Guide

Rack Systems

■ The Rack-Mountable ProLiant Storage System /U is one of the lightest

weight rack components and should be located higher in the rack than

many other components. For help in locating the storage system in the

19-inch rack, refer to the Rack Builder software installation utility

available from your local Compaq Reseller or Authorized

Service Provider.

■ A grounded electrical outlet that is easily accessible and located as near

the storage system as possible

Installing the Storage System

Using the guidelines above, install the ProLiant Storage System /U as

explained below.

Tower Systems

Place the storage system in its chosen location. Proceed to “Installing the Hot-

Pluggable Hard Drives” later in this chapter.

Rack Systems

To install Rack-Mountable ProLiant Storage System /U in a 19-inch rack, you

must perform these steps.

IMPORTANT:

Before installing the storage system in a rack, read “Rack Warnings

and Precautions” at the end of this chapter for important information regarding

proper rack installation.

1. Remove any blank panels from the chosen rack location.

2. Use the supplied template to mark the location of the mounting

hardware on the vertical mounting rails of the rack cabinet. One side of

the template is used for the front rails of the rack and the other side for

the rear rails. Instructions are included on the template.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Brak uwag

Compaq ProLiant Storage System U1 Podręcznik Użytkownika Strona 31