Compaq Armada 1120T Instrukcja Naprawy Pobierz pdf (Strona 153)

NOTE: A replacement panel has a diaper, or shield, preinstalled on the

back. The panel may be installed optionally on either a Contura 400

or Armada 1100 CTFT display.

2. Position the CTFT (10.4 in) panel into the display enclosure, ensuring

that the ZIF connector end of the display cable is exposed on the

right side of the panel (Figure 5-103).

3. Secure the CTFT (10.4 in) panel with four screws to the display

enclosure.

Removing the CTFT (10.4 in) Display Cable

To remove the CTFT (10.4 in) display cable, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Open the computer.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The computer becomes top-heavy when the keyboard assembly is removed and

the display is opened. To prevent damage to the display and the computer,

ensure that the display assembly is opened at a 90-degree angle.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 197 198

Brak uwag

Compaq Armada 1120T Instrukcja Naprawy Strona 153